FAQ

Which Grinding Mill Is Suitable for 1 TPH 800 Mesh Talc Powder Production?

2026-04-14 10:13:11

Summary:

For 1 TPH talc at 800 mesh (≈15 μm, D97), ultrafine grinding is required. MW Micro Powder Mill or LUM Ultrafine Vertical Mill are suitable, with MW preferred for small-capacity, high-precision production.

Details:

Material Characteristics and Grinding Behavior

Talc has a Mohs hardness of 1, making it one of the softest industrial minerals. It is highly platy and exhibits good lubricity, which reduces grinding resistance but can affect classifier efficiency due to particle adhesion. Feed size is typically below 10–20 mm, and moisture should be kept under 2–3% to maintain stable airflow and avoid agglomeration.

Mill Selection for 800 Mesh Production

800 mesh (D97) requires high classification accuracy rather than high grinding force. Standard Raymond mills are not suitable due to limited classifier performance. Recommended options include:

MW Micro Powder Mill: Designed for 600–2500 mesh; high-precision classification, suitable for 1 TPH capacity
LUM Ultrafine Vertical Mill: Suitable for larger systems; stable operation but typically higher minimum capacity

Process Considerations

001 (3)_1767929649018.jpg

At 800 mesh, particle size control depends heavily on classifier rotor speed and airflow balance. Talc’s lamellar structure can lead to over-grinding if residence time is too long. MW mills use multi-stage classification to reduce coarse particle leakage and maintain D97 consistency.

Typical energy consumption ranges from 30–45 kWh/t depending on system configuration. Efficient dust collection is required due to the fine and lightweight nature of talc powder.

Practical Selection

For a 1 TPH project, MW Micro Powder Mill is generally the most practical choice due to its scalability and fine particle control. LUM Ultrafine Vertical Mill is more suitable when capacity requirements increase beyond small-scale production.